9)Press select/ /audio tone (or the OK soft key). You will hear a confirmation tone, and Done! appears in the display.

/QXKGU



$GGVJQXGP52&

note

Storing Caller ID Messages in the Phonebook

Messages shown in the Caller ID list (see page 52) can be stored in the phonebook. The phone number and name of the party on the Caller ID list can be stored in memory.

1)When the phone is in standby mode, select the Caller ID message to be stored.

2)Press select/ /audio tone (or the STORE soft key). Store/Edit Name appears. If the Caller ID message is already stored in memory, you will hear three beeps and This data is already stored!! appears. The number will not be stored.

3)To complete the setting, follow the steps 4-9 in “Storing and Editing Phone Numbers, Names, Distinctive Rings and Speed Dial” on page 42.

Storing a Redial Record

1)With the phone in standby mode, press pause/redial.

2)Press pause/redial repeatedly to display the number to be stored.

3)Press select/ /audio tone (or the STORE soft key). Store/Edit Name appears. If the number is already stored in memory, you will hear three beeps and This data is already stored!! appears. The number will not be stored.

4)To complete the setting, follow the steps 4-9 in “Storing and Editing Phone Numbers, Names, Distinctive Rings and Speed Dial” on page 42.

•If a call comes in via a telephone system that does not offer Caller ID service, no information is stored.

•If the Caller ID message was received as a private/unknown number or the message does not have the number, you cannot store the message in the phonebook. If it was received as private/unknown name, the message will be stored as <No Name>.

•Even if all 100 memory locations are full, the message will be stored in the phonebook. However, the oldest Caller ID message will be erased from the Caller ID list.

P H O N E B O O K

w w w . u n i d e n . c o m

P H O N E B O O K [ 4 4 ]

Page 45
Image 45
Uniden DCT7488 owner manual Storing a Redial Record, Qxkgu, Storing Caller ID Messages in the Phonebook