Uniden DCT7488 owner manual Remote Operation, If you press select

Models: DCT7488

1 96
Download 96 pages 48.54 Kb
Page 68
Image 68

note

•If you press select/

/audio tone while another handset is screening a call, you will hear a beep and you can not screen a call.

•The time stamp will not be heard until you have set the time.

•When the answering

system is full, (7.. appears on the base. You should delete some messages so that the system can record new messages. (Refer to "Deleting a message" on page 65.)

1)After the answering system answers, the base speaker will let you hear the calls

as the machine records the message. To adjust the volume, press volume up/ down. If you set the answering system to off, you cannot screen a call.

2)To answer the call, pick up the corded handset or press on the base.

To mute the Call Screen, press the MUTE soft key or . To cancel muting, press the SCREEN soft key.

From the handset

Press select//audio tone when the system is answering. To answer the call, press talk/flash or .

The answering system will disconnect automatically.

Remote Operation

You can check, play, or delete messages when you are away from home or from another room using a handset. Additionally, you can record, select, or delete your own greeting message.

If you press end before the answering system answers, the phone will return to standby.

If the answering system does not answer within 6 seconds, you hear a beep and the phone will return to standby.

When you receive a call, the remote operation is canceled.

You can change the handset volume during a remote operation.

If you have new messages and old messages, after you have reviewed your new messages, you can play your old messages by pressing /2 again.

•To switch to normal conversation, press on the handset.

[ 6 7 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E

w w w . u n i d e n . c o m

Page 68
Image 68
Uniden DCT7488 owner manual Remote Operation, If you press select