Uniden DECT1480 manual Using the System While Youre Away from Home, Programming a security code

To...	From the base	From a handset
answer the call	NA	Press Talk/flash.
mute the call screen	Press Play/stop.	Press End or return the
without answering*		handset to the cradle.

*If you mute the call screen, the system continues taking the message: it just stops playing through the speaker.

Using the System While You're Away from Home

You can also use your answering system from any touch-tone phone. Before you can use this feature, you must program a security code.

Programming a security code

1.With the phone in standby, open the menu from any handset.

2.Select Ans. Setup, then select Security Code.

.Use the number keypad to enter a two-digit security code (01 to 99). Press Menu/select when you’re finished.

Remember to make a note of your new security code!

Dialing In to Your System

1.Call your telephone number and wait for the system to answer. (If your answering system is off, it will answer after ten rings and sound a series of beeps instead of your greeting.)

2.During the greeting or beeps, press 0 and immediately enter your security code. If you enter it incorrectly 3 times, the system hangs up and returns to standby.

.The system announces the current time, the number of messages stored in memory, and a help prompt. It will beep intermittently to let you know it's waiting for your command.

4. When you
	01	Repeat message	05	Stop playback
hear beeping,
	02	Play message	06	Turn the system on
enter a 2-digit
	03	Skip message	09	Turn the system off
command from
	04	Delete message	10	Hear help prompts
this chart:

19