Uniden DECT1480 manual Weak or Hard To Hear Audio, If… Try…, Announce Only

If…	Try…
The system won't	- Making sure the Record Time is not set to
	Announce Only.
record messages.
	- Deleting messages (memory may be full).
A handset can't access	- Seeing if another handset is using the system.
the answering system.	- Making sure the phone is in standby.
My outgoing message	- If there was a power failure, you may
is gone.	have to re-record your personal outgoing
	message.
I can’t hear the base	- Making sure call screening is turned on.
speaker.	- Changing the base speaker volume.
Messages are	- The incoming messages may be too long.
	Remind callers to leave a brief message.
incomplete.
	- Deleting messages (memory may be full).
When I answer on an	- You may have to change the line mode.
extension, the phone
keeps ringing (or	Contact Customer Service for instructions
keeps recording.)

Weak or Hard To Hear Audio

If a caller’s voice sounds weak or soft, the signal might be blocked by large metal objects or walls; you might also be too far from the base, or the handset’s battery may be weak.

Try moving around while you’re on a call or moving closer to the base to see if the sound gets louder.

Make sure the handset’s battery is fully charged.

Try adjusting the earpiece volume.

Do you use a T-Coil hearing aid?

•If you have a hearing aid equipped with a telecoil (T-coil) feature, the interaction between the hearing aid

& digital cordless phones can cause noise in the handset. If you have a T- coil hearing aid & you have problems with noise on the line, try turning on T-coilmode. Open the menu. Select Handset Setup, then select T-coil.

•Using T-coil mode can shorten the handset’s talk time; make sure to watch the battery status and keep the battery charged.

21