If…

Try…

A handset is not

- Charging the battery for 15-20 hours.

- Checking the battery connection.

working.

- Resetting the handset.

 

A handset says

- Moving the handset closer to the base.

Unavailable.

- Seeing if another handset is in Privacy Mode.

No handsets display

- Letting calls ring twice before answering.

Caller ID information.

- Making sure your Caller ID service is active.

Caller ID displays briefly

- You may have to change the line mode.

and then clears.

Contact customer service.

I can’t transfer calls.

Resetting all handsets.

Two handsets can’t talk

Making sure no handset is in Privacy Mode.

to the caller.

 

The answering system

- Making sure the answering system is on.

does not work.

- Making sure the base is plugged in.

The system won’t

- Making sure the Record Time is not set to

Announce Only.

record messages.

- Deleting messages (memory may be full).

 

A handset can’t access

- Seeing if another handset is using the

system.

the answering system.

- Making sure the phone is in standby.

 

I can’t get my handset

- Re-registering the MULTIRANGE charger.

to switch to the

- Making sure the MULTIRANGE charger and

repeater.

handset are registered to the same base.

The LINK light on the

 

MULTIRANGE charger

Moving the MULTIRANGE charger closer to

randomly starts

the base.

blinking.

 

Weak or hard to hear audio

If a caller’s voice sounds weak or soft, the signal might be blocked by large metal objects or walls; you might also be too far from the base, or the handset’s battery may be weak.

28

Page 28
Image 28
Uniden DECT3380 manual Weak or hard to hear audio, Unavailable, Announce Only