Registering a handset
When you reset a handset (or if you buy a new one), that handset displays a Handset Not Registered message. If you see this message on
a handset, you need to register it to a base before you can use it.
Does the handset fit in the base cradle?
Yes | No |
|
|
|
|
| 1. | With the phone in standby, |
|
| press and hold Find on the base |
Place the handset in the base. |
| for about 5 seconds. |
The display should say Handset | 2. | On the handset you want |
Registering. |
| to register, press and hold # |
|
| until the display says Handset |
|
| Registering (about 2 seconds). |
|
|
|
In about 30 seconds, the handset display should say Registration Complete. Press TALK/FLASH and make sure you get a dial tone.
If... | Try... |
you don’t hear a dial tone | Making sure the handset is |
- The display says Registration Failed | fully charged, then starting |
| over at step 1. |
Registering the MULTIRANGE™ charger
Registering the MULTIRANGE charger is a separate process from registering the handset. You can use the charger even if the handset is not registered.
1.With the phone in standby, press and hold FIND on the base for about 5 seconds.
32
