Uniden DECT3380 manual Using the System While You’re Away from Home, From the base From a handset

handset at a time can screen calls. If another handset is screening the call, the handset beeps and returns to standby.

To...	From the base...	From a handset...
hear the caller	Just listen to the
	caller over the	Press Messages.
leaving a message
	speaker.
answer the call	Not available.	Press Talk/flash.
	Press Play/stop.	Press End or return the
		handset to the cradle.
mute the call screen
	If you mute the call screen, the system continues
without answering
	taking the message: it just stops playing through
	the speaker.

Using the System While You’re Away from Home

You can also use your answering system from any touch-tone phone. Before you can use this feature, you must program a security code.

Programming a security code

1.With the phone in standby, open the menu from any handset.

2.Select Ans. Setup, then select Security Code.

3.Use the number keypad to enter a two-digit security code (01 to 99). Press Menu/select when you’re finished.

Remember to make a note of your new security code!

Dialing in to your system

1.Call your telephone number and wait for the system to answer.

If you have the Ring Time set to Toll Saver, the system answers after 2 rings if you have new messages and 4 rings if you don’t. You can hang up during the third or fourth ring.

If your answering system is off, it will answer after about ten rings and sound a series of beeps instead of your greeting.

26