CAUTION! DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven.
Changing from Tone to Pulse Dialing
Your phone communicates with the telephone network two ways: tone dialing or pulse dialing. Most telephone companies use tone dialing. If your phone company uses pulse dialing, you will need to change your phone’s dial mode.
1.From a handset, open the menu and select Global Setup.
2.Select Dial Mode, then select Pulse. The phone sounds a confirmation tone.
If you use pulse dialing and you need to send DTMF tones during a call (if you’re using an automated response system, for example), press * to temporarily switch to tone dialing. When the call ends, the phone automatically returns to pulse dialing mode.
Resetting and Registering Handsets
If you are having trouble with a cordless handset or if you want to replace one, you need to clear the registration information from the base and the handset:
| Do you have the base the handset is registered to? | ||
Yes | No |
| |
|
|
|
|
1. | Press and hold END and # until the | 1. | Press and hold END and |
| System Reset menu appears (about |
| # until the System Reset |
| 5 seconds). |
| menu appears (about 5 |
2. | Select Deregister HS. The display |
| seconds). |
| lists all registered handsets. | 2. | Select Base Unavailable. |
3. | Select the handset you want to reset. | 3. | When the handset asks |
4. | When the handset asks you to |
| you to confirm, select |
| confirm, select Yes. The handset |
| Yes. The handset deletes |
| clears its information from the base |
| its own link without |
| and deletes its own link to the base. |
| contacting the base. |
31
