DVR User’s Manual
4.5.6Calling Preset Points
Follow the steps to call preset points.
•Press a Channel key to view the corresponding camera in full screen.
•Then press DOME to enter dome control mode. Then a Hint Screen, shown as blow figure, will display on the screen.
•Press 2 to hide the dome control Hint Screen; press 2 again to toggle the Hint Screen.
•Press 1 to access the Set/Go Preset function.
| Dome Preset |
|
Index | Set Preset | Go Preset |
1 | NO | NO |
2 | NO | NO |
3 | NO | NO |
4 | NO | NO |
5 | NO | NO |
6 | NO | NO |
7 | NO | NO |
•Use UP / DOWN keys to select the desired preset number from the menu.
•Set the <Go Preset> of the selected preset number to <YES>, and press ENTER to call the preset point.
•Now the selected dome camera rotates to the preset position automatically.
37
