DVR User’s Manual
39
5.2 Getting Start of Installation Refer to the following description to install the remote control software.
5.2.1 Changing Internet Settings
The PC you want to operate with the remote monitoring software should be
set to accept ActiveX plug-ins. Please follow the steps to set the Internet
security settings appropriately.
• Before operating the remote monitoring software, please check the IP
address of your DVR series unit. To check the IP address, press MENU
key on the unit and enter password to access OSD setup menu. Select
<System Setup>, <Network Setup>, then <LAN Setup> to check the IP.
• Start the IE; you may start it either by clicking on the desktop icon, or by
using the Start menu to access it.
NOTE: Windows IE provides the ActiveX component that is
required when using the remote monitoring software.
• Select <Tools> from the main menu of the browser, then <Internet
Options>, and then click the <Security> tab.
• Select <Trusted sites> and click <Sites> to specify its security setting.