DVR User’s Manual
Appendix D: Connect Analog Camera via UTP Converter
Introduction:
The UTP converter is made especially for users who want to build a connection between an UTP DVR and a traditional analog camera, which allows the transmission of power and video signal through one CAT5 cable.
The UTP converter has two cables at one
A
Installation:
To build up an UTP connection using the UTP converter, connect the BNC and power connectors to camera respectively, and connect with the DVR using an Ethernet CAT5 cable.
NOTE: The UTP Converter can provide power up to 5.5W. If the power consumption of your camera is higher than 5.5W, do NOT connect it to the UTP Converter.
57
