DVR User’s Manual
5.2.2.1Log in / Log off
You can log in using the <Admin> or <User> account. <Admin> account can perform unit configuration freely, while <User> account has more limitation on remote access to the unit.
One “Admin” and up to two “User” can access a DVR series unit at the same time. Furthermore, if the “Admin” account is currently accessing the unit’s OSD setup menu via front panel of the unit, then you cannot save information as an “Admin” on the remote monitoring software. The Admin account of the DVR series unit has priority.
The following steps demonstrate procedures to view video from remote unit:
•Start the remote monitoring software by entering the IP Address of the DVR series unit in the Address bar of the browser. Or you may click on the Favorite entry for the unit (if the IP address of the unit has been set).
•Enter your Username and password. You can save password in the list if needed. The default usernames and passwords are listed as below.
| Login Type | |
Default User name | Admin | User |
Default Password | 1234 | 4321 |
•Click <OK> to log in to the DVR series unit. The process may take a few seconds.
•If the connection is made successfully, the main window will display live video of the attached cameras.
If you close the IE browser, you log off the system at the same time.
42
