Speaker: Adjust the handset speaker volume
You can choose from six volume levels for the handset speakerphone. To adjust the speaker volume, go to Speaker Setup menu, and select Speaker Volume select the volume level you want to use.
You can also adjust the handset speaker volume during a call by pressing the 
or 
key on the side of the handset, and then up (to make it louder) or down (to make it softer).
Audio Tone
If you aren't satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece. Your phone gives you three audio tone options: low, natural or high. Go to Speaker Setup menu, and select Audio Tone and select the option that sounds best to you.
(Audio tone adjustments only apply to the earpiece, not the speakerphone.)
5RGCMGT
8QNWOG
5'.'%6
#WFKQ6QPG
.QY6QPG
5'.'%6
(Speaker Setup)
Speaker Volume
Audio Tone
Mute
While the handset is ringing, you can mute the handset ringer for this call by
pressing end on the handset. To mute the base ringer, press 
or end/find hs on the base. The phone will ring again on the next call.
Mute the Microphone
When you're on the phone, press menu/select and select Mute to turn off the microphone so the caller can't hear you. The display shows Mute On while the microphone is muted. To turn off muting, repeat the above step again.
note 
You can only mute the handset ringer if the handset is off the base when the phone starts ringing.
[ 5 9 ] Using Your Phone | w w w . u n i d e n . c o m |
