Intercom
You can use the intercom to talk to another handset or base without using the phone line. While the phone is in standby mode, press back/hold/int’com. Select the handset or base you want to page. If you select All, all other handsets and the base will be paged.
If the handset or base you're trying to page is busy, the phone displays System busy Please try later. If the handset you're trying to page is out of range, the phone displays No Signal Press HELP. The page is canceled.
Answering an intercom page
+PVGTEQO
#NN
*CPFUGV
*CPFUGV
*CPFUGV
$CUG
.#0& 
/1$+.'
When the handset receives an intercom page, it sounds a tone and shows the ID of the handset that is paging. If you page the base, Base appears. To answer the page,
pick up the handset and press talk/flash, 
, or back/hold/int’com on the handset,
/flash or back/hold/int’com on the base.
•If you receive an outside/int’com call or page while selecting the other handset, the operation is canceled.
•If the party does not answer within one minute, the operation is canceled.
•During an intercom call, if you receive a call, you will hear a ringer tone from the ear speaker.
•If all handsets or base are paged, only the first party to answer the page will connect.
•If you do not select a handset or base within 30 seconds, the operation will be canceled.
To hang up an intercom page, press end on either side of the handset or end/find hs on the base.
[ 8 5 ] | w w w . u n i d e n . c o m |
