Setting the Time, To select the minute | Uniden EXA3955 specs

Setting the Time

The clock on the EXA3955 answering system starts when power is applied to the base. Follow these steps to set the clock to the correct time.

note

status

ans. on/off

memo/rec delete

1 Press mute/menu twice.

The system announces the current time. The message counter displays [ ].

2 Press flash/set to select the day of the week. You hear the current day and the number ([ ] through [ ]) is displayed on the base.

•Normally the idle time for the menu mode is

20 seconds before the system returns to standby. However for setting the time, the idle time is extended to two minutes.

•Press and hold or

to quickly scroll through numbers on the display.

mute/menu redial/p memory flash/set

3 Press or until the correct day is announced and the corresponding number is displayed.


4	Press	flash/set	to select the day.
5	Press	or	until you hear the correct hour
	setting. The numbers [			] through [	] are displayed
	on the base as each hour is announced.
6	Press	flash/set	to select the hour.
7	Press	or	until you hear the correct minute
	setting. The numbers [			] through [	] are
	displayed on the base as each minute is announced.
8	Press	flash/set	to select the minute.

[ 26 ] T H E I N T E G R AT E D A N S W E R I N G D E V I C E

Image 28

Uniden EXA3955 manual Setting the Time, To select the minute

Contents

Page Page Contents Welcome FeaturesExplanation purposes Controls and Functions N T R O L S a N D F U N C T I O N S Fast Forward Key Play/Stop Key Rewind Key Checking the Package Contents Do the following steps Setting up the PhoneChoose the best location Battery use time per charge Install the battery packLow battery alert Connect the base unit Base Setting only Choose the dialing modePress and hold flash/set until you hear a confirmation tone Setting the handset retainer clip for wall mounting Standard wall plate mounting Direct wall mounting Making and Receiving Calls From the Handset From the BaseHandset On the Base Handset Off the Base Adjusting the Base Ringer Ringer tone and volumeEarpiece volume Redial Traveling Out-of-Range Flash and Call Waiting Storing Phone Numbers With the Handset Making Calls with Memory Dialing With the BaseFrom the Memory Location From the One-touch Priority Dial Erasing Stored Numbers Press talk key When speaking on the base When speaking on the handsetWay Conferencing Intercom/Page Feature Intercom from the base to the handsetIntercom from the handset to base Base. The handset beeps. If no answer, press To transfer from the handset to the base Call Transfer FeatureTo transfer from the base to the handset Mute Handset/Base Chain DialingSelecting a Different Channel Tone Dialing Switch-over Integrated Answering Device Using the Menu Mode Setting up your Answering SystemTurning the Answering System On/Off Setting Your Outgoing Message Greeting Preset messageRecording a personal outgoing message Greeting Choosing between the two outgoing messages Setting the Time To select the minute Setting a Personal Security Code Setting the base ringer volume Adjusting the speaker volume levelFour times You hear the current ringer option High Setting the Ring Time Announce only feature Selecting the message record time Using your Answering System Playing your messages Repeating a message Skipping a message Deleting a message Voice memo Recording a conversation Remote access away from homeTo stop recording, press or memo/rec You may select a command from the following chart Command Turn on the answering system remotely Changing the Digital Security Code Changing the Face Plate Headset InstallationTo remove the Face plate To attach the Face plate Installing the Beltclip Maintenance Battery replacement and handling Power Failure Troubleshooting Symptom Symptom Suggestion General Information Battery InformationAC Adapter Information Precautions Installation Considerations Index G, H Remote access away from home Remote Operation Card Task Key At Uniden, we’ll take care of you