Symptom Suggestion | Uniden EXA3955 guide

Symptom	Suggestion
The answering system does	• Make sure the base unit is plugged in.
not work.	• Make sure the answering system is turned on.
The answering system does	• Set the record time to either the one minute or four minute option.
not answer calls.	• The memory may be full. Delete some or all of the saved messages.

Messages are incomplete.	• The incoming messages may be too long. Remind callers to leave a brief message.
	• The memory may be full. Delete some or all of the saved messages.
	• Remind callers to speak loud enough and clearly when leaving a message.
	• Long pauses in the callers message may cause the system to stop recording.
After a power failure, the	• Record your personal outgoing message again. The default message should remain.
outgoing message is deleted.

No sound on the base unit speaker during call monitoring or message playback.

Cannot access remote call-in features from another touch-tone phone.

•Adjust the speaker volume on the base unit.

•Make sure you’re using the correct PIN code.

•Make sure that the touch-tone phone you’re using can transmit the tone for at least two seconds. If it cannot, you may have to use another phone to access your messages.

If you still have a problem. • Call our customer hotline at 1-800-297-1023.

[ 42 ] A D D I T I O N A L I N F O R M AT I O N

Image 44

Uniden EXA3955 manual Symptom Suggestion

Contents

Page Page Contents Explanation purposes FeaturesWelcome Controls and Functions N T R O L S a N D F U N C T I O N S Fast Forward Key Play/Stop Key Rewind Key Checking the Package Contents Choose the best location Setting up the PhoneDo the following steps Low battery alert Install the battery packBattery use time per charge Connect the base unit Press and hold flash/set until you hear a confirmation tone Choose the dialing modeBase Setting only Setting the handset retainer clip for wall mounting Standard wall plate mounting Direct wall mounting Making and Receiving Calls From the Handset From the BaseHandset On the Base Handset Off the Base Adjusting the Base Ringer Ringer tone and volumeEarpiece volume Redial Traveling Out-of-Range Flash and Call Waiting Storing Phone Numbers With the Handset Making Calls with Memory Dialing With the BaseFrom the Memory Location From the One-touch Priority Dial Erasing Stored Numbers Press talk key Way Conferencing When speaking on the handsetWhen speaking on the base Intercom/Page Feature Intercom from the base to the handsetIntercom from the handset to base Base. The handset beeps. If no answer, press To transfer from the base to the handset Call Transfer FeatureTo transfer from the handset to the base Selecting a Different Channel Chain DialingMute Handset/Base Tone Dialing Switch-over Integrated Answering Device Turning the Answering System On/Off Setting up your Answering SystemUsing the Menu Mode Setting Your Outgoing Message Greeting Preset messageRecording a personal outgoing message Greeting Choosing between the two outgoing messages Setting the Time To select the minute Setting a Personal Security Code Setting the base ringer volume Adjusting the speaker volume levelFour times You hear the current ringer option High Setting the Ring Time Announce only feature Selecting the message record time Using your Answering System Playing your messages Repeating a message Skipping a message Deleting a message Voice memo To stop recording, press or memo/rec Remote access away from homeRecording a conversation You may select a command from the following chart Command Turn on the answering system remotely Changing the Digital Security Code To remove the Face plate To attach the Face plate Headset InstallationChanging the Face Plate Installing the Beltclip Maintenance Battery replacement and handling Power Failure Troubleshooting Symptom Symptom Suggestion AC Adapter Information Battery InformationGeneral Information Precautions Installation Considerations Index G, H Remote access away from home Remote Operation Card Task Key At Uniden, we’ll take care of you