Setting a Personal Security Code | Uniden EXA3955 guide

9 Press or until you hear the correct AM or PM setting. The message counter displays [ ] or [ ].

10 Press flash/set to select the AM/PM setting.

A confirmation tone sounds, then the day and time are announced for your review.

Setting a Personal Security Code

To play your messages from a remote location, you will need to enter a two-digit Personal Identification Number (PIN) code (00-99). To select a PIN, perform the following steps:

		1	Press	mute/menu	three times.
			The current PIN code is announced as it is displayed
status			on the base.
			on the base.
ans. on/off
memo/rec	delete	2	Press		to change the PIN code. The system
		2	Press	flash/set	to change the PIN code. The system
			announces current PIN code.
mute/menu redial/p	memory flash/set	3	Press	or	until the desired number appears.
		4	Press	flash/set	to select the PIN code.
			A confirmation tone sounds, system announces the
			new PIN code.
		To exit the menu mode, press				if desired.

note

The PIN code is set to “80” when you purchase the EXA3955.

THE INTEGRATED ANSWERING DEVICE

T H E I N T E G R AT E D A N S W E R I N G D E V I C E [ 27 ]

Image 29

Uniden EXA3955 manual Setting a Personal Security Code

Contents

Page Page Contents Explanation purposes FeaturesWelcome N T R O L S a N D F U N C T I O N S Controls and Functions Fast Forward Key Play/Stop Key Rewind Key Checking the Package Contents Choose the best location Setting up the PhoneDo the following steps Low battery alert Install the battery packBattery use time per charge Connect the base unit Press and hold flash/set until you hear a confirmation tone Choose the dialing modeBase Setting only Standard wall plate mounting Setting the handset retainer clip for wall mounting Direct wall mounting From the Handset From the Base Making and Receiving CallsHandset On the Base Handset Off the Base Ringer tone and volume Adjusting the Base RingerEarpiece volume Redial Flash and Call Waiting Traveling Out-of-Range With the Handset Storing Phone Numbers With the Base Making Calls with Memory DialingFrom the Memory Location From the One-touch Priority Dial Press talk key Erasing Stored Numbers Way Conferencing When speaking on the handsetWhen speaking on the base Intercom from the base to the handset Intercom/Page FeatureIntercom from the handset to base Base. The handset beeps. If no answer, press To transfer from the base to the handset Call Transfer FeatureTo transfer from the handset to the base Selecting a Different Channel Chain DialingMute Handset/Base Tone Dialing Switch-over Integrated Answering Device Turning the Answering System On/Off Setting up your Answering SystemUsing the Menu Mode Preset message Setting Your Outgoing Message GreetingRecording a personal outgoing message Greeting Choosing between the two outgoing messages To select the minute Setting the Time Setting a Personal Security Code Adjusting the speaker volume level Setting the base ringer volumeFour times You hear the current ringer option High Setting the Ring Time Selecting the message record time Announce only feature Playing your messages Using your Answering System Skipping a message Repeating a message Voice memo Deleting a message To stop recording, press or memo/rec Remote access away from homeRecording a conversation Command You may select a command from the following chart Turn on the answering system remotely Changing the Digital Security Code To remove the Face plate To attach the Face plate Headset InstallationChanging the Face Plate Maintenance Installing the Beltclip Power Failure Battery replacement and handling Symptom Troubleshooting Symptom Suggestion AC Adapter Information Battery InformationGeneral Information Precautions Installation Considerations G, H Index Remote Operation Card Remote access away from home Task Key At Uniden, we’ll take care of you