Low Battery

Step 3 (continued)

Battery use time (per charge)

From fully charged

Seven hours coutinuous use.

Seven days when the handset is in the standby mode.

When the battery charge becomes low

When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, “Low Battery” flashes and none of the

keys will operate. If the phone is in use, “Low Battery” flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging.

Notes

Even when the battery pack is not being used, it will gradually discharge over a long period. For optimum performance, be sure to return the handset to the base unit after a telephone call for battery charging.

The built-in memory backup can hold numbers and names stored in the memory for up to 2 minutes, while you replace the battery pack.

If you must replace the battery pack during a telephone call, complete the replace- ment of the battery pack within 30 seconds, and you can return to the original call.

Rechargeable batteries have a memory effect that reduces standby and talk time. To

avoid this memory effect, on a monthly basis, use the phone until the

Low Battery” indication appears. Then charge the battery for 12-15 hours.

Cleaning the battery contacts

To maintain a good charge, it is important to clean all battery contacts on the handset and base unit about once a month. Use a soft cloth or other contact cleaner.

Do not use any liquids or solvents.

9

Page 12
Image 12
Uniden EXI 8965 Battery use time per charge, When the battery charge becomes low, Cleaning the battery contacts