Uniden EXS 2050 manual Remote access away from home, Command Function # then Repeat

During the remote

operation, displays on the base.

You must enter a command within 15 seconds of entering the command waiting mode or the answering system automatically hangs up and returns to standby.

The system will only play back messages for four minutes and then it returns to the command waiting mode. To continue playing your message, press # then 2 again within 15 seconds

Remote access away from home

You can operate your answering system from a remote location using any touch-tone telephone. Use this function to check for recorded messages, to play or delete messages, to record a new outgoing message, and to monitor sounds in the room.

1 Call your telephone number.

2 While the greeting message plays, press # and your PIN code.

If the answering machine is off, let it ring 10 times until the greeting message plays.

Then, press # and your PIN code.

3 The answering system announces the time and day stamp and the number of messages stored in memory. Then the message playback automatically begins.

4 You may continue to listen to your message or you may select a command from the following chart.

Command	Function
# then 1	Repeat

#then 2 Playing your messages

#then 3 Skipping a message

#then 4 Deleting a message

#then 5 Stop message playback

#then 6 Answering system on

#then 7 Voice memo record/stop

(up to 4 minute recording time)

#then 8 Greeting message record/stop

#then 9 Answer system off

# then * Room monitor

5 After all of your messages have played, or the playback time exceeds 4 minutes, you will hear intermittent tones indicating that the system is in the command waiting mode. You may enter another command at this time from the chart above.

6 When you finish, hang up to exit the system.

The answering system automatically returns to standby.

30