Choose the dialing mode, Pulse | Uniden EXS 2050 manual

Use only the supplied AD-420

AC adapter. Do not use any other Polarity of the plug AC adapter.

Connect the AC adapter to a continuous power supply.

Place the base unit close to the

AC outlet so that you can unplug the

AC adapter easily.

If your telephone outlet isn't modular,	Modular
contact your telephone company for
contact your telephone company for
assistance.

Choose the dialing mode

PULSE TONE

Depending on your dialing system, set the PULSE-TONEswitch as follows:

If your dialing system is	Set the switch to

Tone	TONE

Pulse	PULSE

If you aren't sure of your dialing system

Make a trial call with the PULSE-TONEswitch set to TONE.

If the call connects, leave the switch as is; otherwise, set to PULSE.

7

Image 10

Uniden EXS 2050 manual Choose the dialing mode, If your dialing system is Set the switch to Tone, Pulse

Contents

Page Features Introduction Controls and functions Talk Flash 43 44 45 Contents Base unit Read this firstHandset Checking the package contents Setting up the base unit Choose the best location If you want to install the base unit on the wall, see Connect the base unit Pulse Choose the dialing modeIf your dialing system is Set the switch to Tone If you arent sure of your dialing system Mounting the base unit on a wall Standard wall plate mounting Direct wall plate mounting Installing the handset battery pack Use only Uniden Battery BT-905 supplied with your phone Cleaning the charging contacts Battery use time per chargeWhen the battery charge becomes low Do not use any liquids or solvents Making a call Other Operations From the base Receiving a callFrom the handset Ringer mute Adjusting the volume Handset ringer tone and volume Redialing a call Flash and Call WaitingMute Using the page feature Traveling out-of-range Storing phone numbers Making calls with memory dialing Memory dialing Chain dialing Erasing a stored phone number When speaking on the base When speaking on the handsetWay conferencing Integrated answering device Setting up your answering system Turning the answering system on/off Recording a personal outgoing message Greeting Setting your greetingPreset Message Choosing between the two outgoing messages Selecting the message record time Announce only featureSelecting a PIN code Setting ring time switch Using your answering system Playing your messages Repeating a message Skipping a message Deleting individual messages Deleting a messageVoice memo Deleting all messages Recording a conversation Remote access away from home Command Function # then Repeat Remote room monitor Changing the digital security code To attach the beltclip Installing the beltclipHeadset installation To remove the beltclip Maintenance Battery replacement and handling Troubleshooting Symptom Suggestion Symptom Suggestion At Uniden, we’ll take care of you K, L IndexW, X, Y, Z