11
3The number is dialed. After
about 5 seconds, the call-time
display appears.
4To hang up, press or
place the handset on the base.
The call-time will be displayed
for about 5 seconds.
Dialing from standby
1Enter the phone number. (Up to 32
digits.)
Example: Enter 8178583300
2Press . “Talk” flashes on the
display.
Then the volume setting appears for a
few seconds.
For example, if the volume is set to
high, the display shows:
During the operation you
must press a key within 20
seconds or the phone will
return to standby.
BASICSPress if
you enter a wrong number
at step 1.
Making a call
With the handset
Other Operations
To Do this
To adjust the earpiece volume Press or during the call.
To temporarily switch to tone dial Press . The following
(When the base is set to pulse numbers dialed will be sent as
mode) tone dialing.
To enter a pause in the dialing Press .
sequence
To improve reception Press .
“Scanning” appears on the
display while changing a channel.
EXT1865 7/25/00 16:31 Page 11