Scan mode operation, Using the radio in scan mode | Uniden MHS125

Scan mode operation

You can save channels into memory and then use scan mode to monitor those channels from lowest to highest. If the radio detects a signal on a channel, it stays on that channel as long as the signal is received; when the signal stops, the radio continues scanning.

When it detects a signal, the radio stays on the channel until you press the

Channel Up button or the signal stops.Resume scan

08 10 11 12

13 14 15 17

The radio scans about

5 channels in 0.5 seconds.

Using the radio in scan mode

To activate scan mode, press Scan-Dual.

You must have at least two channels in memory to start a scan.

You cannot transmit while in scan mode.

To save a channel into memory, select the channel, then press the MEM-SOSbutton. The MEM icon displays whenever you tune to that channel.

To remove a channel from memory, set the radio to that channel, then press the MEM-SOSbutton. The MEM icon no longer displays.

When the radio stays on a channel, press Channel Up to leave that channel and resume scanning.

To end the scan, press the Scan-Dualbutton again; the radio remains on the last scanned channel.

E-10	Uniden MHS125 Radio Owner’s Manual

Image 14

Uniden MHS125 owner manual Scan mode operation, Using the radio in scan mode, 08 10 11

Contents

MHS125 Making a Distress Call Speak slowly clearly calmly Faire un appel de détresse Parlez lentement clairement calmement Table of Contents Features Introduction  Transmitter power level select  Dual, Triple and Quad Watch operation Getting Started What’s included Back view Parts of the MHS125Front view Button Press to Press and hold to ChargerKnob Turn clockwise to Turn counter-clockwise to Icon What it means Reading the displayDisplay icons and what they mean How It Works Mode What it does Use it when you To turn it Want to On/offWatch mode What it does To turn it on/off Normal mode operation Normal mode with Weather Alert Watch Normal mode with Triple Watch or Dual Watch Normal mode with Quad Watch 08 10 11 Scan mode operationUsing the radio in scan mode Both Weather Alert and Triple/Dual Watch in scan mode Scan mode with Weather Alert WatchScan mode with Triple Watch or Dual Watch 08 10 Weather mode with Weather Alert Watch Weather modeUsing the radio in weather mode Weather mode with Triple Watch or Dual Watch Setting Up the HardwareInstalling the Battery Attaching the Antenna Using the Alkaline Battery Case Follow these steps to use the alkaline battery case Charging the Battery Mounting the Charger Important notes on charging the battery Attaching the Belt Clip Setting Squelch Level Using Your RadioChanging the Volume Making a Transmission Boosting the transmission powerChanging the Channel Setting the UIC Channel Mode Using the Strobe SOS Light Turning the Key Beep On and Off Maintenance and TroubleshootingUsing the External Speaker/Mic Jack With SOS LED Do This For this This state Problem Common Questions General SpecificationsProblem Things to Try Transmitter Channels and Frequencies MHzUS channel frequencies and names Receiver US Marine Channels RX Freq TX Freq Status Name Canadian channel frequencies and names Canadian Marine Channels RX Freq TX Freq Status Name Canadian Marine Channels RX Freq TX Freq Status Name International channel frequencies and names International Marine Channels RX Freq TX Freq Status Name International Marine Channels RX Freq TX Freq Status Name Weather channel frequencies and names Channel Regulations and Safety Warnings Maritime Radio Services Operation Basic Radio Guidelines FCC/Industry Canada Information Body-Worn Operation Lithium Ion Battery Warning Three Year Limited Warranty Page Page QUESTIONS?