The charger is not waterproof. If the charger falls into the water, unplug it before attempting to remove it from the water. After you remove the charger from the water, please contact Customer Service (see the back cover page for contact information).
Wipe off dirt or shake water from your radio before placing in the charger if your radio gets dirty or wet.
Important notes on charging the battery
Charge the battery fully before using the radio. When the battery is completely charged, the CHARGE LED turns green.
Don’t use the charger when the ambient temperature is below 0° C (32° F) or above 45° C (113° F).
If the radio is powered down, the battery can charge in about seven hours. (If the radio is powered on, the battery takes longer to charge.)
Attaching the Belt Clip
To attach the belt clip:
1. Rotate the belt clip so that the finger indentation is towards the
top of the radio.
2. Align the center of the clip with the anchor post.
3. Place the clip on the post and slide the clip upwards until it clicks into place.
Uniden MHS125 Radio Owner’s Manual |