With the

 

 

SOS LED in

Do This -

For this -

this state -

 

 

OFF

Press and hold MEM-

SOS LED signals

SOS key for 2 seconds.

SOS in Morse code.

 

SOS

Press and hold MEM-

SOS LED remains

SOS key for 2 seconds.

on continuously.

 

Continuous

Press and hold MEM-

SOS-LED turns off.

SOS key for 2 seconds.

 

 

Turning the Key Beep On and Off

Key beep is the tone that sounds when you press a key or a button. To turn off the key beep, press and hold the Channel Up or Channel Down button while turning ON the radio. To turn on the key beep, turn off the radio and then press and hold the Channel Up or Channel Down button while turning ON the radio again.

Using the External Speaker/Mic Jack

You can connect an optional external speaker-mic to this watertight jack. Unscrew the cap, which is held by the rubber cap-keeper to prevent loss. Insert the special gasketed plug and screw down the shell, which assures prevention of water entering the jack. Two available units are

HHSPM Speaker Mic

VOX100 Headset Mic.

For details, consult your dealer or contact Uniden directly (see back cover for contact information).

Maintenance and Troubleshooting

Due to its rugged design, your radio requires very little maintenance. However, it is a precision electronic instrument, so you should follow a few precautions:

E-20

Uniden MHS125 Radio Owner’s Manual

Page 24
Image 24
Uniden MHS125 Maintenance and Troubleshooting, Turning the Key Beep On and Off, Using the External Speaker/Mic Jack