Uniden SSE17+1 manual Wall Mounting the Base

Wall Mounting the Base

This phone can be mounted on any standard wall plate.

1) Remove the wall mount adapter from the base and snap it into the notches on the bottom of the base.

2) Plug the AC adapter to the DC IN 9V jack.

CAUTION: To avoid risk of fire and shock, only use the

Uniden AAD-065S(M) AC adapter.

3) Route the AC adapter cord inside the molded wiring channel as shown.

4) Plug the AC adapter into a standard 240V AC wall outlet.

5) Plug the telephone cord into the phone jack.

6) Route the telephone cord inside the molded wiring channel as shown.

7) Plug the telephone cord into the telephone outlet.

8) Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until he phone is firmly seated.

9) On the base unit, pull the handset retainer out of the slot. Rotate it clockwise 180 degrees.

[15]

SSE17+1 OM.indb 15 15/7/08 12:08:28 PM