Uniden SSE17+1 manual Setting the Record Time or Announce Only, Activating Call Screening

Setting the Record Time (or Announce Only)

You can select how long a caller has to record a message. You have three record time options. The options 1 MINUTE or 4 MINUTES set the duration for recording the incoming messages. ANNOUNCE ONLY answers the call and plays either your personal greeting or the pre-recorded system greeting, but prevents the caller from leaving a message.

1) Press [menu/set] on the base.

2) Press [select/▼] to move the pointer to select RECORD TIME, and then press [menu/set].

3)Press [select/▲] or [select/▼] to select Record Time 1 MINUTE, 4 MINUTES, or ANNOUNCE ONLY.

4)Press [menu/set]. You will hear a confirmation tone.

Note:

•For your convenience, voice prompts will guide you through the menus.

•Press [ ] (play/stop) on the base to return to standby.

•If you do not press a key within 30 seconds, the phone will time out and exit the menu.

Activating Call Screening

Your phone allows you to listen to callers leaving you a message. This feature can be turned on or off with the following steps:

1) Press [menu/set] on the base.

2) Press [select/▼] to move the pointer to select CALL SCREENING, and then press [menu/set].

[44]

SSE17+1 OM.indb 44 15/7/08 12:08:44 PM