Connecting the Cordless Handset and Charger
The cordless handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the charger.
1) Connect the AC adapter to the DC IN 9V jack and to a standard 240V AC wall outlet.
CAUTION: Use only the Uniden
2) Set the charger on a desk or tabletop, and place the handset in the charger with the keypad facing forward.
3) Make sure that the charge light illuminates. If the charge light does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the charging contacts.
4)Charge the handset battery pack for at least
5)To test your connection, try making a call from the cordless handset. If your call does not connect, check to make sure the battery is fully charged. If you see LOW BATTERY on the cordless handset display, check to make sure the battery is properly connected. To check the battery, slide the battery compartment door open and check the battery cables to ensure a tight and proper connection. If your handset still does not work, please contact Uniden’s Customer Service department. Please see inside the back cover for contact information.
[17]
SSE17+1 OM.indb 17 | 15/7/08 12:08:29 PM |
