Uniden manual SSE17+1 OM.indb 15/7/08 120849 PM

Symptom	Suggestion
	• The incoming messages may be too long. Remind callers to leave a brief
Messages are incomplete.	message.
	•The memory may be full. Delete some or all of the saved messages.
After a power failure, the	• Record your personal outgoing message again. The default message should
outgoing message is
	remain.
deleted.
No sound on the base
speaker during call	• Adjust the speaker volume on the base.
monitoring or message	• Make sure the call screen feature is set to on.
playback.
Cannot access remote call-	• Make sure you are using the correct PIN code.
	• Make sure that the touch-tone phone you’re using can transmit the tone for at
in features from another	least two seconds. If it cannot, you may have to use another phone to access
touch tone phone.
	your phone.
CID Announce feature is not	• Check to make sure the CID Announce switch on the back of the base is set to
announcing new incoming	ON.
	• Check your base speaker volume to ensure it is loud enough to hear the CID
calls.
	Announce feature.

[58]

SSE17+1 OM.indb 58 15/7/08 12:08:49 PM