Uniden SSE17+1 manual Storing Caller ID Information to Speed Dial Locations

7) Press [select/intercom] on the handset ([menu/set] on the base). You will hear a confirmation tone.

8) After about 2 seconds, the speed dial entries will appear.

9) Press [memory] on the handset ([mem] on the base) to exit memory setup mode. The phone returns to standby.

Storing Caller ID Information to Speed Dial Locations

Caller ID names & numbers shown in the Caller ID list can be stored to a speed dial location.

For instructions on viewing the Caller ID information, see page 40. If the Caller ID information did not include the phone number, then you will not be able to store it.

Follow these steps to store a Caller ID name and number to a speed dial location:

1)Press [CID] on the handset ([cid] on the base). Select the phone number to be stored from the Caller ID list by pressing [volume//+] or [volume/

/-]on the handset ( [select/] or [select/] on the base).

2) Press [memory] on the handset ([mem] on the base).

[27]

SSE17+1 OM.indb 27 15/7/08 12:08:35 PM