C. Connect the base unit
1) Connect the AC adapter to the DC IN 9V jack and a standard 120V AC wall outlet.
2) Set the base on a desk or tabletop. Place the handset on the base unit as shown.
3) Raise the antenna to a vertical position.
Af ter installing the battery pack in the handset, charge the handset at least 15- 20 hours before plugging into the phone line. Once the handset battery pack is fully charged, connect the telephone line cord to the base and the telephone wall outlet.
4) Connect the telephone line cord to the TEL LINE jack and to a telephone outlet.
• If your telephone outlet isn´t modular, contact your telephone company |
|
|
| |
|
|
| ||
for assistance. |
|
|
| |
• Use only the supplied |
|
|
| |
Modular | ||||
• Connect the AC adapter to a continuous power supply. | ||||
|
|
| ||
• Place the base unit close to the AC outlet so that you can unplug the AC adapter easily. | ||||
!
Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.
GETTING STARTED
G E T T I N G S TA R T E D [ 9 ]
