Uniden TRU 3455 owner manual Selecting the message record time, Selecting a PIN code

Selecting the message record time

You can set your answering system to record messages up to one or four minutes long.

One minute option: move the REC TIME switch to 1.

Four minute option: move the REC TIME switch to 4.

▼Announce only feature:

The announce only feature plays an outgoing message, but it will not allow the caller to leave a message. Move the REC TIME switch to the ANN position.

The message counter LED displays “ “ when the system is on standby. The prerecorded outgoing message for Announce only feature is: “Hello, no one is available to take your call.“ (twice)

Selecting a PIN code

To play your messages from a remote location, you will need to enter a two-digit Personal Identif ication Number (PIN) code (00-99). To select a PIN, perform the following steps.

1. On the base, press and hold pin until a tone sounds and the LED displays .

2. To set the f irst number, press or repeatedly to scroll from 0 to 9. When the desired number appears in the display, press pin.

3.To set the second number, press or to scroll from 0 to 9. When the desired number appears in the display, press pin. Then the entered PIN code is announced.

Press and hold or to quickly scroll

through numbers on the display.

THE INTEGRATED ANSWERING DEVICE

T H E I N T E G R AT E D A N S W E R I N G D E V I C E [ 25 ]