Scanning the Stored Channels | Uniden UBC72XLT instruction

press Func + or Func + to step through the frequencies.

To release the hold and continue searching, press Hold. Or, if you did not press Hold, simply press Func + or Func + to continue searching.

Note: Because there are many different frequencies allocated to police departments, it can take several minutes to search all the service frequencies.

Storing Frequencies into Channels During Service Search

You can store frequencies you found during service search or service search hold mode into channels.

1.Press Func and Pgm during service search or service search hold mode. The frequency and the lowest blank channel alternately appear.

2.Press E to store the frequency into the blank channel. If you want to select another channel, press Func + or Func + before you press E. You can also use the 0-9 key to select the bank.

If you entered a frequency that has already been entered elsewhere, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press Clr then enter the correct frequency. To enter the frequency anyway, press E to accept.

Scanning the Stored Channels

To begin scanning channels, press Scan.

The scanner scans through all non-locked channels in the activated banks. (See “Locking Out Channels” on Page 44 and “Turning Channel-Storage Banks On and Off” on Page 43). When the scanner finds a

Operation

31

Image 31

Uniden UBC72XLT owner manual Scanning the Stored Channels, Storing Frequencies into Channels During Service Search

Contents

UBC72XLT Scanner Precautions Precautions UBC72XLT Controls and Display UBC72XLT Controls and Display Contents Contents Introduction Introduction Frequency Range Step Mode Transmission MHz KHz Feature Highlights Feature Highlights About This Manual Feature Highlights Conventional Scanning What is Scanning?What is Searching? Understanding Scanning Repeater Operation Simplex Operation Information On The Internet Where To Obtain More Information Included With Your Scanner Included With Your Scanner Setting Up Your Scanner Setting Up Your ScannerUsing Internal Batteries Using Non-Rechargeable Batteries Setting Up Your Scanner Page Setting Up Your Scanner Connecting the Antenna Using AC Power Connecting an Extension Speaker Connecting an Earphone/HeadphoneConnecting an Optional Antenna Attaching the Belt Clip About Your Scanner About Your Scanner Hold Look At The Keypad Func + Pgm Look At The Display About Your Scanner Understanding Banks Service BanksChannel-Storage Banks Operation Turning On The Scanner Setting SquelchOperation Storing Known Frequencies Into Channels Searching For and Temporarily Storing Active Frequencies Service Search Scanning the Stored Channels Storing Frequencies into Channels During Service Search Manually Selecting a Channel Special Features Special FeaturesClose CallTM RF Capture Technology Setting the Close Call Options Special Features Using Close Call RF Capture Chain Search Chain Search Mode Chain Search Hold Mode Direct Entry Search Setting the Search Range Direct Entry Search Hold Mode Search Skip Memory Delay Turning Channel-Storage Banks On and Off Priority Locking Out Channels Using the Display Backlight Using Keylock Troubleshooting Troubleshooting Troubleshooting Resetting the Scanner General Use Care and MaintenanceCleaning Care and Maintenance Birdies Repairs Specifications Specifications Seconds Optional Accessories Optional Accessories One-Year Limited Warranty One Year Limited Warranty Uniden Australia PTY Limited Service Division Thank YOU for Buying a Uniden Product