Care and Maintenance, General Use, Location | Uniden UBC72XLT

Care and Maintenance

Keep the scanner dry. If it gets wet, wipe it dry immediately. Use and store the scanner only in normal temperature environments. Handle the scanner carefully: do not drop it. Keep the scanner away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.

General Use

•Turn the scanner off before disconnecting the power.

•Always write down the programmed frequencies in the event of memory loss.

•If memory is lost, simply reprogram each channel. The display shows 000.000 in all channels when there has been a memory loss.

•Always press each button firmly until you hear the entry tone for that key entry.

Location

•Do not use the scanner in high-moisture environments such as the kitchen or bathroom.

•Avoid placing the unit in direct sunlight or near heating elements or vents.

•If the scanner receives strong interference or electrical noise, move it or its antenna away from the source of the noise. If possible, a higher elevation might provide better reception.

•Also try changing the height or angle of the antenna.

Cleaning

•Disconnect the power to the unit before cleaning.

Care and Maintenance

49

Image 49

Uniden UBC72XLT owner manual Care and Maintenance, General Use, Location, Cleaning

Contents

UBC72XLT Scanner Precautions Precautions UBC72XLT Controls and Display UBC72XLT Controls and Display Contents Contents Introduction Introduction Frequency Range Step Mode Transmission MHz KHz Feature Highlights Feature Highlights About This Manual Feature Highlights What is Searching? What is Scanning?Understanding Scanning Conventional Scanning Repeater Operation Simplex Operation Information On The Internet Where To Obtain More Information Included With Your Scanner Included With Your Scanner Using Internal Batteries Setting Up Your ScannerUsing Non-Rechargeable Batteries Setting Up Your Scanner Setting Up Your Scanner Page Setting Up Your Scanner Connecting the Antenna Using AC Power Connecting an Extension Speaker Connecting an Earphone/HeadphoneConnecting an Optional Antenna Attaching the Belt Clip About Your Scanner About Your Scanner Hold Look At The Keypad Func + Pgm Look At The Display About Your Scanner Understanding Banks Service BanksChannel-Storage Banks Operation Turning On The Scanner Setting SquelchStoring Known Frequencies Into Channels Operation Searching For and Temporarily Storing Active Frequencies Service Search Scanning the Stored Channels Storing Frequencies into Channels During Service Search Manually Selecting a Channel Special Features Special FeaturesClose CallTM RF Capture Technology Setting the Close Call Options Special Features Using Close Call RF Capture Chain Search Chain Search Mode Chain Search Hold Mode Direct Entry Search Setting the Search Range Direct Entry Search Hold Mode Search Skip Memory Delay Turning Channel-Storage Banks On and Off Priority Locking Out Channels Using the Display Backlight Using Keylock Troubleshooting Troubleshooting Troubleshooting Resetting the Scanner Cleaning Care and MaintenanceCare and Maintenance General Use Birdies Repairs Specifications Specifications Seconds Optional Accessories Optional Accessories One-Year Limited Warranty One Year Limited Warranty Uniden Australia PTY Limited Service Division Thank YOU for Buying a Uniden Product