Turning Channel-Storage Banks On and Off | Uniden UBC72XLT specs

frequencies into channels or when you search frequencies. When the delay feature is on, DLY appears. If it is off, follow one of these steps to program a delay depending on how the scanner is operating,.

•If the scanner is scanning and stops on an active channel where you want to store a delay, quickly press Func + Dly before it continues scanning again. DLY appears.

•If the desired channel is not selected, manually select the channel, then press Func + Dly. DLY appears.

•If the scanner is searching, press Func + Dly while the scanner is searching. DLY appears and the scanner automatically adds a 2-second delay to every frequency it stops on in that band.

To turn off the 2-second delay, press Func + Dly while the scanner is monitoring a channel, scanning, or searching. DLY disappears.

Turning Channel-Storage Banks On and Off

You can turn each channel-storage bank on and off. When you turn off a bank, the scanner does not scan any of the 10 channels in that bank.

While scanning, press the number key that corresponds to the bank you want to turn on or off. Numbers appear at the top of the display, showing the currently selected banks.

The scanner scans all the channels within the displayed banks that are not locked out (see “Lock- ing Out Channels” on Page 44). The bank number flashes when the scanner scans a channel that belongs to the bank.

Special Features

43

Image 43

Uniden UBC72XLT owner manual Turning Channel-Storage Banks On and Off

Contents

UBC72XLT Scanner Precautions Precautions UBC72XLT Controls and Display UBC72XLT Controls and Display Contents Contents Introduction Introduction Frequency Range Step Mode Transmission MHz KHz Feature Highlights Feature Highlights About This Manual Feature Highlights Conventional Scanning What is Scanning?What is Searching? Understanding Scanning Repeater Operation Simplex Operation Information On The Internet Where To Obtain More Information Included With Your Scanner Included With Your Scanner Setting Up Your Scanner Setting Up Your ScannerUsing Internal Batteries Using Non-Rechargeable Batteries Setting Up Your Scanner Page Setting Up Your Scanner Connecting the Antenna Using AC Power Connecting an Extension Speaker Connecting an Earphone/HeadphoneConnecting an Optional Antenna Attaching the Belt Clip About Your Scanner About Your Scanner Hold Look At The Keypad Func + Pgm Look At The Display About Your Scanner Understanding Banks Service BanksChannel-Storage Banks Operation Turning On The Scanner Setting SquelchOperation Storing Known Frequencies Into Channels Searching For and Temporarily Storing Active Frequencies Service Search Scanning the Stored Channels Storing Frequencies into Channels During Service Search Manually Selecting a Channel Special Features Special FeaturesClose CallTM RF Capture Technology Setting the Close Call Options Special Features Using Close Call RF Capture Chain Search Chain Search Mode Chain Search Hold Mode Direct Entry Search Setting the Search Range Direct Entry Search Hold Mode Search Skip Memory Delay Turning Channel-Storage Banks On and Off Priority Locking Out Channels Using the Display Backlight Using Keylock Troubleshooting Troubleshooting Troubleshooting Resetting the Scanner General Use Care and MaintenanceCleaning Care and Maintenance Birdies Repairs Specifications Specifications Seconds Optional Accessories Optional Accessories One-Year Limited Warranty One Year Limited Warranty Uniden Australia PTY Limited Service Division Thank YOU for Buying a Uniden Product