Uniden UBC9000XLT manual Bank a P ch, Bank B ch, Bank C ch 52 LlO OOO.OOOOMHz

If an error is made during programming, or if the frequency is out of range, this screen appears. Enter a valid channel or frequency number.

If the frequency is stored in another channel, the display will indicate the original channel for that frequency.

Bank A P ch 1

OUTOFBAND

BankA ch 1 DUPLICATECH230

To program more channels, repeat steps 3 and 4.

Press ~ to store the same frequency into the selected channel.
Or, select another channel.
Or, press ~		twice to clear.		I
Programming With the Rotary Tuner
Usethese controls:
		n	II1IdI!n a p use-.. T
8~8			D
( PROG11 SENO11 AlPHA)		"-J [
			rrr
~	uo	c::) c:::!)
~~	0	CTCSS	DATA'"
@ @	c::) (DELAY.)		c:::3

Scan, Numeric Keys, and Rotary Tuning Controls

1. PressIMANUAL) to enter the

Manual Mode.	Bank B ch 49
OR	LlO OOO.OOOOMHz
Turn the Rotary Tuner.
Note: Make sure the LOCK LED is out.

2.Select CHAN with the Rotary Tuner Mode Selector, then turn knob. Example: channel 52

Turn right to step up through channels, left to step down through channels.

Bank C ch 52 LlO OOO.OOOOMHz

13