Uniden UBC9000XLT manual Bank C ch 52 123.7750MHz

3.Select a frequency. Example: 123.7750

4.Enter the Frequency. Then press ~ .

5.To turn to a new frequency, select FREQ withthe Rotary Tuner Mode Selector then turn rightto step up, leftto step down. Example: 123.7875 (turn right)

Bank C ch 52 123.7750MHz

12.5KHz ch :::'?2

AM 123.7875IvrHl-

Note: The channel indicatorflashes on the display, indicatingthat the

frequency displayed is not programmed in that channel.

6. Press ~	to program the	ch 52
channel.	Bank C

123.7875MHz

To program more channels with the Rotary Tuner, repeat steps 2 - 6.

Programming with Search

The Search feature lets you search for active frequencies in a range you choose and store any or all of those frequencies into channels.

For more information about searching, see "The Search Mode," page 29. Use these keys:

8~~	CJ	miii!
( PROG11SENO11ALPHA)		.

.~~~ '~-@~

@ @

Search, Scan, Numeric,and Bank Keys,

and Rotary Tuning Controls

Note: Be sure to set SQUELCH before you begin a search. See "Setting the Squelch," page 8.

14

.- ' --.-.