Uniden UBC9000XLT manual Troubleshooting

Troubleshooting

If your UBC9000XL T is not performing properly, try the steps listed below.

PROBLEM

Scanner won'twork.

Poor reception.

Scan won't stop.

Scan won't start.

Search won'tstart.

canner won't allow any program Inputs

Can'tprogram channel with alpha character

SUGGESTION

Check the connections at both ends of the AC Adaptor.

Tum on the wall switch of your room.

Move the AC Adaptor to another wall outlet.

Make sure the power switch is tumed on. Check the antenna and its connection.

You may be in a fringe area. This may require an optional multi-band antenna. Check with your dealer or local electronics store.

Adjust the Squelch Control.

Check the antenna connection.

It is possible that none of the programmed channels are active at the time. Try the band search.

Press the bank key again. Make sure there are some programmed channels.

Adjust the Squelch Control.

Adjust the Squelch Control.

Check the Enter Lock feature.

Alpha character programming is available up to 250 channels. Make sure the programmed channel is within that range.

I

If you still cannot get satisfactory results and want additional information, or to return the unit for service, please call Uniden Customer Service Division. The address and phone number are listed in the Warranty.

(at the end of this manual)

51

~