Troubleshooting
If your UBCT9 is not performing properly, try the following steps.
Problem | Suggestion | |
|
|
|
Scanner won’t work. | 1. | Check the connections at both ends of the AC Adapter. |
| 2. | Turn ON the wall switch of your room. You could be |
|
| using an outlet controlled by the wall switch. |
| 3. | Move the AC Adapter to another wall outlet. |
|
|
|
Improper reception. | 1. | Check the antenna connection. |
| 2. | Move the scanner. |
| 3. | You may be in a remote area which could require an |
|
| optional |
|
| local electronics store. |
|
|
|
Scan won’t stop. | 1. | Adjust squelch threshold - refer to page 14, “Setting the |
|
| Squelch”. |
| 2. | Check the antenna connection. |
| 3. | Check to see if many of the channels are Locked Out. |
|
| If so, the scanner has less chance of finding an active |
|
| channel. |
| 4. | Review each channel’s frequency to see if it is still |
|
| stored in Memory and is correct. |
| 5. | It’s possible that none of the programmed frequencies |
|
| are currently active. |
|
|
|
Scan won’t start. | 1. | Press SCAN key again. |
| 2. | Adjust the SQL control. |
| 3. | Check to see if all channels are Locked Out |
|
|
|
53
