note
•This feature only works when the handset(s) is within the range of the base.
•While a station is monitored, it will not receive telephone calls or intercom page.
Using the Room/Baby Monitor
This feature allows you to monitor sounds in another room. Place a handset or the base in the room you wish to monitor; it will function as a microphone. The other station can be set to function as a remote speaker, allowing you to monitor sounds in the room.
1) | Press the MENU soft key and select |
|
| the Room Monitor menu. |
|
2) | Select the handset or the base you |
|
| want to monitor by using volume |
|
| up/down. |
|
3) | Press the OK soft key. | /QPKVQTKPI |
| Monitoring appears on the handset and Room Monitor 㨭 㨭 *CPFUGV | |
| appears on the base, and you hear sounds in the room |
|
| where the handset is installed. | '0& |
|
| |
4) | To turn off the Room Monitor, press the END soft key, or end. |
If you want to prevent other handsets from monitoring this one, press the MENU soft key. Select the Handset Setup menu, and then the Room Monitor submenu. Select Off and press the OK soft key.
[ 5 7 ] S P E C I A L F E A T U R E S | w w w . u n i d e n . c o m |