PAGING | USING TONE SERVICES ON |
| A PULSE LINE |
When you press PAGE on the base,
the handset sounds a tone. You can
use this feature to page someone who is in the same room as the hand-
set, or to help you locate the handset
when it is away from the base.
.
Note: If the handset's POWER ON/OFF
Some special services, such as bank-
1.Be sure TONE/PULSE is set to
PULSE.
2.Dial the service'smain number.
3.When the service answers, press the key under P1. Then, dial the additional numbers. The phone
uses
switch is OFF or the TALK indicator is
on, the page tone does not sound.
USING REDIAL
4.After you complete the call, return the handset to the cradle or press TALK!HANGUP. The phone auto- matically resets to the pulse mode.
000 |
| Note: We recommend you not use | ||
| the redial feature for numbers that in- | |||
000 |
| clude the key under P1entry, because | ||
| the | |||
P1 | P2 | P3 | mode change might not be long | |
C:=J | C:=J C:=J | |||
enough to allow the special service to | ||||
REDIAUPAUSE FLASH | ||||
C:=J | C:=J C:=J | answer. | ||
|
|
| ||
Follow these steps to redial the last number you dialed.
1.PressTALK!HANGUP and listen for a dial tone.
2.Press PAUSE/REDIAL.The phone automatically dials the last number you dialed.
The redial memory holds up to 32 dig- its, so you can redial
8
