Using _your XC345
le XC345 has dual keypads: one in the Handset, and one on the Base Unit. lis is like having two phones because most operations can be performed ;ing either the Handset or the Base Units.
laking and Receiving Calls
he following features of your XC345 phone are different depending on the ,andset'slocation when you make or receive a call.
HANDSET
ANSWER CALL
MAKE
CALL
HANG
UP
REDIAL
ON BASE UNIT OFF BASE UNIT
Pick up Handset Press (AutoTalk)
1) | Pick up | 1) | Press |
| Handset | 2) | Listen for dial |
2) | Press |
| tone |
3)Listen for dial 3) Dial number tone
4)Dial number
Press
Return Handset to Base (AutoStandby)
1) | Pick up | 1) | PressC][) |
| Handset | 2) | Listen for dial |
2) | Press |
| tone |
3)Listen for dial 3) Press tone
BASE UNIT
1)Press (sPEAKER)
The speaker
LED lights.
2) Talk into the microphone.
Note: A call
causes the
IN USELED to blink.
1)Press(sPEAKER)
2)Listen for dial
tone
3) Dial number
Press (SPEAKER)
ThespeakerLED goesoff.
1) Press(SPEAKER)
The speaker
LED lights.
2)Listen for dial tone
4) | Press |
| 3) Press |
Note 1: Sometimes | when you press ~ | to hang up the phone, you may gE | |
an error tone and the phone will not disconnect. If this happens, | |||
place the Handset on the Base Unit or press ~ | again while | ||
holding the Handset close to the Base Unit.
Note 2: If the Handset is lifted from the cradle while the Base Unit is engage with the outside line, the Base Unit will resume to Standby Mode ani the Handset will switch to TALK Mode.
29
