Troubleshooting
If your XC345 Cordless Telephone is not performing to your expectations,
please try these simple steps. If you are still unable to resolve the problems, contact Uniden Customer Service for Assistance.
Problem
Charge light won't come on when Handset is placed in Base Unit.
Suggestion
. Make sure AC Adapter is plugged into the Base Unit and wall outlet.
. Make sure Handset is properly seated in Base Unit.
Audio sounds weak and/or scratchy.
Can't make or receive calls.
Handset doesn't ring or receive a page.
Base Unit doesn't ring or receive a page.
. PleasecleanboththeHandsetandBasecharging
contactswitha pencileraseror dry cloth.
. Make sure that the Base Unit antenna is
fully extended and vertical.
. Move the Handset and/or Base Unit to
different locations and try again.
. Press the CHANNEL button to select another channel.
. Check both ends of the Base Unit telephone line cord.
. Make sure the AC Adapter is plugged into the Base Unit and wall outlet.
. Disconnect the AC Adapter for a few minutes, and then reconnect it.
.
. Set the RINGONlBATTSAVEswitch on the Handset to RINGON.
. Extend the Base Unit antenna vertically.
. The Handset may be too far away from the Base Unit.
. Place the Base Unit away from noise sources.
. The Digital Security Code may be erased. Set the Digital Code.
. Set the Base Unit Ringer switch to LO or HI.
Note: Do not attempt to service this unit yourself. All service must be done
by qualifiedservicepersonnel.
50
