Uniden XC345 Changing Channels, Hold, Mute, and Flash, Changing Channels Placing a Call on Hold

Changing Channels, Hold, Mute, and Flash

To change channels, place a call on hold, mute a call, or access call waiting while on the phone, follow these steps:

CHANGING CHANNELS

PLACING A CALL ON HOLD

	HANDSET			BASE
Press (CHANNEL)			Note: You must use the
Note: Change		channels to	Handset	to change
help eliminate		background	channels.
noise.
1)	Press		1) Press	(INT'COM)
	Note: The phone will		Note: The phone		will
	begin to ring, indicating		be.Ginto ring, and the
	the call is on hold.		(SPEAKER)LED willblink,
2)	Press	to continue	indicating the call		is on
	call.		hold.

2) Press (INT'COM)or (SPEAKER)to

continue call.

MUTE

FLASH

Note: You can only mute a

call while using the Base Unit.

If the call waiting tone

sounds, press (FLASH)to accept the waiting call.

-OR-

If you have finished a call and want to make another

call, press (FLASH) to hang up and get a dial tone.

Press to disable the

Base Unit microphone. The Mute LED lights. Note: You will be able to

hear the caller, but they will not hear you.

If the call waiting

tone sounds, press (FLASH) to accept the waiting call.

-OR-

If you have finished a call and want to make another

call, press (FLASH)tohang up and get a dial tone.

*Note: If you do not have any special phone services, pressing FLASH might disconnect the current call.

If the above FLASH operation does not work and you have Telecom's easy call service connected then follow Telecom's instructions to operate "call waiting".

30