Uniden XC631Plus RJj, PressThe talkIJID flashes, Enter the number to be stored in Pulse Mode

rJj

~

~

~

~

~

\.D

U ><

~

~

0

~

c.,:,

Z

~

rJj

~

USINGYOURXC631PLUS

I

3.If you wish to enter a delay between numbers (for accessing a

switch board or long distance service), press Flash/Rdl at the point in the number sequence you wish to pause.

(Note: The Flash/Rdl button counts as one digit. Pressing Flash/Rdl more than once will increase the length of the

pause between numbers).

4. Press-- anda onedigitnumber(0-9) forthe

memory location.

5.A 2-tone confirmation beep will be heard indicating that the number has been stored.

NOTE: Youhave20 secondsafterpressing-- to enter

I the number you wish to store, and use only one digit for

,the memory location. Otherwise, an error tone will be heard,

Storing a Mixed-(TonelPulse) Number

6. Write down the stored number and its memory location number on one of the enclosed stickers.

If your phone is set up for Pulse Dialing, you can store a mixed mode number (up to 16 digits) to easily access long distance services.

1. Press(The talkIJID flashes)

2.Enter the number to be stored in Pulse Mode.

3.Press 0 on the Handset. (Note: The 0 counts as one digit)

4.Enter the number to be stored in Tone Mode.

5.If you wish to enter a delay between numbers (for accessing a switch board or long distance service), press Flash/Rdl - at the point in the number sequence you wish to pause.

6.Press-- anda onedigitnumber(0-9) forthe memory location.

26