ViewSonic PJL7211 manual Easy Menu, Item, Description, Aspect, Keystone, Picture Mode, ViewSonic

EASY MENU

From the EASY MENU, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table.

Item			Description
ASPECT	Using the ◄/► buttons switches the mode for aspect ratio.
	See the ASPECT item in IMAGE menu.
KEYSTONE	Using the ◄/► buttons corrects the vertical keystone
	distortion. See the KEYSTONE item in SETUP menu.
	Using the ◄/► buttons switches the picture mode.
	The picture modes are combinations of GAMMA and COLOR
	TEMP settings. Choose a suitable mode according to the projected
	source.
		NORMAL ó CINEMA ó DYNAMIC ó BOARD(BLACK)
		DAYLIGHT ó WHITEBOARD ó BOARD(GREEN)
			GAMMA	COLOR TEMP
		NORMAL	1 DEFAULT	2 MID
PICTURE MODE		CINEMA	2 DEFAULT	3 LOW
		DYNAMIC	3 DEFAULT	1 HIGH
		BOARD(BLACK)	4 DEFAULT	4 Hi-BRIGHT-1
		BOARD(GREEN)	4 DEFAULT	5 Hi-BRIGHT-2
		WHITEBOARD	5 DEFAULT	2 MID
		DAYLIGHT	6 DEFAULT	6 Hi-BRIGHT-3

•When the combination of GAMMA and COLOR TEMP differs from pre-assigned modes above, the display on the menu for the PICTURE MODE is “CUSTOM”. Please refer to the GAMMA and COLOR TEMP items in PICTURE menu.

•Lines or other noise might appear on the screen when this function is operated, but it is not a malfunction.

(continued on next page)

ViewSonic 23 PJL7211