Item | Description |
|
|
| Using the ◄/► buttons |
| switches the mode for video |
| format. |
| AUTO ó NTSC ó PAL ó SECAM |
VIDEO FORMAT |
•This item is performed only for a video signal from the VIDEO port.
•The AUTO mode automatically selects the optimum mode.
•The AUTO operation may not work well for some signals. If the picture becomes unstable (e.g. an irregular picture, lack of color), please select the mode according to the input signal.
| Use the ◄/► buttons to select |
| the computer input signal type. |
| AUTO ó SYNC ON G OFF |
| • Selecting the AUTO mode allows |
COMPUTER IN | you to input a sync on G signal or component video signal from the |
port. To input component video signal to the projector, an RCA to | |
| |
| • In the AUTO mode, the picture may be distorted with certain |
| input signals. In such a case, remove the signal connector so that |
| no signal is received and select the SYNC ON G OFF, and then |
| reconnect the signal. |
| Use the ◄/► buttons to turn the |
| frame lock function on/off . |
| ON ó OFF |
FRAME LOCK | • This item can be performed only on a signal with a vertical |
frequency of 49 to 51Hz, 59 to 61 Hz. | |
| • When ON is selected, moving pictures are displayed more |
| smoothly. |
| • This function may cause a certain degradation of the picture. In |
| such a case, please select OFF. |
(continued on next page)
ViewSonic | 31 | PJL7211 |