IMAGE
menu
From the IMAGE menu, items shown in the table below can be performed.
Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
Item | Description |
| |
|
|
| |
| Using the ▲/▼ buttons switches the mode for aspect ratio. | ||
| For a computer signal |
| |
| NORMAL ó 4:3 ó 16:9 ó 16:10 |
| |
ASPECT | For a video signal or component video signal |
| |
4:3 ó 16:9 ó 14:9 |
| ||
|
| ||
| For no signal |
| |
| 4:3 (fixed) |
| |
| • The NORMAL mode keeps the original aspect ratio of the signal. | ||
| Using the ◄/► buttons adjusts the |
| |
| Small (It magnifies picture) ó Large (It reduces picture) | ||
OVER SCAN | • This item can be selected only for a video and component video | ||
signal. |
| ||
|
| ||
| • When this adjustment is too large, certain degradation may appear | ||
| at the frame area of the picture. In such a case, please adjust small. | ||
| Using the ◄/► buttons adjusts the vertical position. |
| |
| Down ó Up |
| |
| • | ||
| the screen. If this occurs, please reset the vertical position to the | ||
V POSITION | default setting. Pressing the RESET button when the V POSITION | ||
is selected will reset the V POSITION to the default setting. | |||
| |||
| • When this function is performed on a video signal or component | ||
| video signal, the range of this adjustment depends on OVER SCAN | ||
| setting. It is not possible to adjust when the OVER SCAN is set to | ||
| 10. |
| |
| Using the ◄/► buttons adjusts the horizontal position. |
| |
| Left ó Right |
| |
| • | ||
H POSITION | the screen. If this occurs, please reset the horizontal position to the | ||
default setting. Pressing the RESET button when the H POSITION is | |||
| selected will reset the H POSITION to the default setting. |
| |
| • When this function is performed on a video signal or component video | ||
| signal, the range of this adjustment depends on OVER SCAN setting. It | ||
| is not possible to adjust when the OVER SCAN is set to 10. |
| |
(continued on next page) |
| ||
ViewSonic | 28 | PJL7211 | |
