ViewSonic PJL7211 INPUTmenu, Item, Description, Progressive, Video Nr, Color Space, ViewSonic

INPUT menu

From the INPUT menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.

Item

Description

	Using the ▲/▼ buttons switches the progress mode.
	TV ó FILM ó OFF
	• This function is performed only for the VIDEO input, and for
PROGRESSIVE	480i@60 or 576i@50 signal at the COMPUTER IN input.
	• When the TV or FILM is selected, the screen image will be sharp.
	FILM adapts to the 2-3 Pull-Down conversion system. But these
	may cause a certain defect (for example, jagged line) of the picture
	for a quick moving object. In such a case, please select OFF, even
	though the screen image may lose sharpness.
	Using the ▲/▼ buttons switches the noise reduction mode.
	HIGH ó MID ó LOW
VIDEO NR	• This function is performed only for the VIDEO input, and for
	480i@60 or 576i@50 signal at the COMPUTER IN input.
	• When this function is excessive, it may cause a certain
	degradation of the picture.

Using the ▲/▼ buttons switches the mode for color space.

	AUTO ó RGB ó SMPTE240 ó REC709 ó REC601
COLOR SPACE	• This item can be selected only for a computer signal or a
	component video signal.

•The AUTO mode automatically selects the optimum mode.

•The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except the AUTO.

(continued on next page)

ViewSonic 30 PJL7211