ViewSonic PJL7211 manual Item, Description, My Text, Display, Writing, ViewSonic

Item	Description
	(1) Use the ▲/▼ buttons on the SECURITY menu to
	select the MY TEXT DISPLAY and press the ►
	button to display the MY TEXT DISPLAY on/off
	menu.
	(2) Use the ▲/▼ buttons on the MY TEXT DISPLAY on/off menu to
	select on or off.
MY TEXT	ON ó OFF
DISPLAY	When it is set ON, the MY TEXT will be
	displayed on the START UP screen and the
	INPUT_INFORMATION when the INFORMATION
	on the SERVICE menu is chosen.
	• This function is available only when the MY TEXT
	PASSWORD function is set to the OFF.
	(1) Use the ▲/▼ buttons on the
	SECURITY menu to select the MY
	TEXT WRITING and press the ►
	button. The MY TEXT WRITING
	dialog will be displayed.
	(2) The current MY TEXT will be
	displayed on the first 3 lines. If not
	yet written, the lines will be blank.
	Use the ▲/▼/◄/► buttons and the
	ENTER or INPUT button to select and
	enter characters. To erase 1 character
	at one time, press the RESET button
	or press the ◄ and INPUT button at
	the same time. Also if you move the
	cursor to DELETE or ALL CLEAR on
MY TEXT	screen and press the ENTER or INPUT
	button, 1 character or all characters will
WRITING
	be erased. The MY TEXT can be input
	up to 24 characters on each line.
	(3) To change an already inserted
	character, press the ▲/▼ button to
	move the cursor to one of the first 3
	lines, and use the ◄/► buttons to
	move the cursor on the character to be
	changed.
	After pressing the ENTER or INPUT button, the character is selected.
	Then, follow the same procedure as described at the item (2) above.
	(4) To finish entering text, move the cursor to the OK on screen and press
	the ►, ENTER or INPUT button. To revert to the previous MY TEXT
	without saving changes, move the cursor to the CANCEL on screen and
	press the ◄, ENTER or INPUT button.
	• The MY TEXT WRITING function is available only when the MY TEXT
	PASSWORD function is set to OFF.

ViewSonic 48 PJL7211