OPTION menu
From the OPTION menu, items shown in the table below can be performed.
Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table
Item | Description | |
|
| |
| Using the ▲/▼ buttons turns on/off the automatic signal search | |
| function. | |
| ON OFF | |
AUTO SEARCH | When the ON is selected, detecting no signal automatically cycles | |
through input ports in the following order. The search is started from | ||
| ||
| the current port. Then when an input is found, the projector will stop | |
| searching and display the image. | |
| COMPUTER IN VIDEO | |
| Using the ▲/▼ buttons turns on/off the DIRECT ON function. | |
| ON OFF | |
| When set to the ON, the lamp in projector will be automatically | |
| turned on without the usual procedure, only when the projector is | |
DIRECT ON | supplied with the power after the power was cut while the lamp was | |
on. | ||
| • This function does not work as long as the power has been | |
| supplied to the projector while the lamp is off. | |
| • After turning the lamp on by the DIRECT ON function, if neither | |
| input nor operation is detected for about 30 minutes, the projector is | |
| turned off, even though the AUTO OFF function is disabled. |
(continued on next page)
ViewSonic | 39 | PJL7211 |